How Much Does a Driveway Cost?

Use our free driveway cost calculator to get an instant estimate. Draw your driveway on the map, choose your materials, and see pricing immediately.

Driveway Cost by State

National Driveway Cost Averages

Material	National Low	National High	Unit
Gravel	$1	$6	sq ft
Asphalt	$3	$18	sq ft
Basic Concrete	$5	$20	sq ft
Stamped Concrete	$9	$32	sq ft
Exposed Aggregate	$7	$22	sq ft
Concrete Pavers	$9	$38	sq ft
Asphalt (new)	$4	$9	sq ft
Asphalt (replacement)	$8	$15	sq ft
Pavers	$10	$28	sq ft
Tar and Chip	$2	$5	sq ft
Heated Driveway	$13	$40	sq ft
Brick	$15	$35	sq ft
Shell (Regional)	$2	$5	sq ft
Cobblestone	$22	$60	sq ft
Flagstone	$15	$35	sq ft
Belgian Block	$18	$45	sq ft
Brick Pavers	$12	$32	sq ft
Decomposed Granite	$2	$8	sq ft
Shell	$2	$5	sq ft

Frequently Asked Questions

How much does a driveway cost?

Driveway installation costs typically range from $2 to $30 per square foot nationwide, depending on material. Gravel is the most affordable at $2 to $5/sq ft, asphalt runs $4 to $10/sq ft, concrete $6 to $15/sq ft, and pavers or heated driveways can reach $30/sq ft or more.

What factors affect driveway cost?

The main factors are material choice, driveway size, base preparation requirements, drainage needs, and local labor rates. Removing an existing driveway, grading the site, and adding features like borders or heating elements can significantly increase cost.

What is the cheapest driveway material?

Gravel is the most affordable driveway material at $2 to $5 per square foot installed. For a paved surface, asphalt is the budget choice at $4 to $10 per square foot. A standard two-car gravel driveway (600 sq ft) costs $1,200 to $3,000.

How long does driveway installation take?

Most residential driveway installations take 2 to 5 days. Gravel driveways can be completed in 1 to 2 days, while concrete requires additional curing time (7 days before driving on it). Paver driveways may take up to a week for larger areas.

Do I need a permit for a new driveway?

Most cities require a permit for new driveway installation or major replacement, especially if it involves changes to the curb cut or sidewalk. Resurfacing an existing driveway usually does not require a permit. Check with your local building department for specific rules.

Cost by State

Alabama $1 – $23 / sq ft 24 cities Arizona $2 – $25 / sq ft 17 cities California $3 – $35 / sq ft 18 cities Colorado $4 – $26 / sq ft 17 cities Connecticut $2 – $45 / sq ft 19 cities Delaware $1 – $22 / sq ft 17 cities Florida $2 – $32 / sq ft 46 cities Georgia $1 – $26 / sq ft 29 cities Idaho $1 – $28 / sq ft 15 cities Illinois $2 – $30 / sq ft 21 cities Indiana $1 – $24 / sq ft 20 cities Iowa $1 – $24 / sq ft 17 cities Kansas $1 – $24 / sq ft 16 cities Kentucky $1 – $23 / sq ft 30 cities Louisiana $1 – $28 / sq ft 20 cities Maine $2 – $40 / sq ft 30 cities Maryland $2 – $23 / sq ft 17 cities Massachusetts $2 – $60 / sq ft 20 cities Michigan $2 – $28 / sq ft 21 cities Minnesota $2 – $28 / sq ft 15 cities Mississippi $1 – $22 / sq ft 22 cities Missouri $1 – $24 / sq ft 18 cities Montana $1 – $35 / sq ft 14 cities Nebraska $1 – $28 / sq ft 14 cities Nevada $2 – $28 / sq ft 14 cities New Hampshire $2 – $26 / sq ft 19 cities New Jersey $2 – $40 / sq ft 19 cities New Mexico $1 – $35 / sq ft 13 cities New York $2 – $40 / sq ft 20 cities North Carolina $1 – $25 / sq ft 32 cities North Dakota $1 – $30 / sq ft 13 cities Ohio $1 – $24 / sq ft 24 cities Oklahoma $1 – $28 / sq ft 22 cities Oregon $2 – $28 / sq ft 16 cities Pennsylvania $2 – $30 / sq ft 20 cities Rhode Island $2 – $50 / sq ft 16 cities South Carolina $1 – $28 / sq ft 33 cities South Dakota $1 – $28 / sq ft 14 cities Tennessee $1 – $24 / sq ft 27 cities Texas $1 – $30 / sq ft 44 cities Utah $4 – $26 / sq ft 17 cities Vermont $2 – $28 / sq ft 17 cities Virginia $2 – $35 / sq ft 30 cities Washington $2 – $32 / sq ft 18 cities West Virginia $1 – $18 / sq ft 22 cities Wisconsin $2 – $28 / sq ft 19 cities Wyoming $1 – $32 / sq ft 14 cities